Want to try it first?
Request a guided session and compare this product with other options at our Nerang store.
About this product
Overview & specifications
The Yamaha Gigmaker FG800 Acoustic Guitar Pack - Gloss is built around the FG800, the dreadnought that has been the sensible first serious acoustic for generations of players. The guitar at its heart has a solid spruce top, and that single spec is what separates a guitar you keep from one you outgrow. Natural gloss finish.
Solid spruce top on a full dreadnought
A solid spruce top moves more freely than a laminate and opens up the more it is played, so the FG800 improves with the hours you put in. The dreadnought body is 412mm wide and 100 to 118mm deep, which is where the volume and low-end push come from when you strum hard. Back and sides are nato or okume, with black binding and a tortoise-pattern pickguard against the gloss.
650mm scale, 43mm nut, die-cast tuners
The 650mm scale gives standard string tension and a clear, punchy attack with a pick. The nato neck has a matt finish that does not grab a sweaty hand, and it carries a walnut fingerboard with a 400mm radius, a 43mm nut and 11mm string spacing that leaves room for fingerpicking. Die-cast chrome TM29T tuners hold pitch far better than the open-gear sets found on cheaper starter guitars.
Set up and ready
The walnut bridge, urea saddle and black ABS pins are a proven combination, and the guitar comes strung with Yamaha FS50BT or D'Addario XT strings. Set up in-store by Guitar World Australia's techs before it ships to you.
Specifications
The finer details
Specifications
| Brand | Yamaha |
|---|---|
| Model | GIGMAKERFG800 |
| Body Shape | Dreadnought Style |
| Scale Length | 650mm (25 9/16") |
| Top | Solid Spruce |
| Back | Nato/Okume |
| Sides | Nato/Okume |
| Neck | Nato |
| Fingerboard | Walnut |
| Fingerboard Radius | R400mm (15 3/4") |
| Bridge | Walnut |
| Nut Width | 43mm (1 11/16") |
| String Spacing | 11.0mm |
| Nut | Urea |
| Saddle | Urea |
| Bridge Pins | Black ABS with White Dot |
| Tuners | Die-cast Chrome (TM29T) |
| Body Binding | Black |
| Soundhole Inlay | Black + White |
| Pickguard | Tortoise Pattern (Black for BL color variation) |
| Body Finish | Gloss |
| Neck Finish | Matt |
| Electronics | None |
| Controls | None |
| Output | None |
| Strings | Yamaha FS50BT or D'Addario XT |
| Body Depth | 100-118mm (3 15/16"- 4 5/8") |
| Body Width | 412mm (16 1/4") |
| Body Length | 505mm (19 7/8") |
| Total Length | 1038mm (40 7/8") |
| Included | Hex Wrench |
| Case | None |
| Colour | Solid-Top Acoustic Guitar Pack Gloss |