Yamaha
Yamaha HS8S 8-Inch Powered Studio Subwoofer
Want to try it first?
Request a guided session and compare this product with other options at our Nerang store.
About this product
Overview & specifications
Yamaha HS8S 8-Inch Powered Studio Subwooferadds the bottom octave to a pair of HS monitors, so you can hear what the kick and the sub bass are actually doing below the reach of a nearfield cone. It pairs a 150 W amplifier with an 8-inch driver in a black MDF bass-reflex cabinet, and it is for the mixer who needs to check low end rather than guess at it.
150 W amp, 8-inch driver, down to 22 Hz
The 150 W amplifier drives an 8-inch woofer in a ported MDF box and reaches down to 22 Hz. That is the region where an 808, a synth sub or a bowed double bass either sits right or turns to mud on a club system, and a nearfield alone will not tell you which.
Balanced ins and outs so it sits in the chain
Two XLR inputs and two balanced TRS inputs take the left and right feed from your interface or desk, and two XLR outputs pass left and right on to the monitors. The sub goes in line between the two, which keeps the cabling tidy and the monitors fed from one place.
Crossover controls that suit the room
A HIGH CUT control sets where the sub stops, adjustable from 80 to 120 Hz with a centre click, and a LOW CUT control with its own on/off switch sets where the monitors take over across the same range. Together with the LEVEL control you can match the sub to HS5s in a small room or HS8s in a bigger one without a hump at the handover.
Phase switch for a quick alignment
The PHASE switch flips between NORM and REV, which is the fast fix for the bass thinning out at the crossover when the sub sits behind or beside the monitors. The cabinet is 389 mm deep, weighs 12.5 kg and draws 70 W, so it will sit under a desk without dominating the room.
Specifications
The finer details
Specifications
| Brand | Yamaha |
|---|---|
| Model | HS8S |
| Strings | LEVEL control, PHASE switch : NORM./REV., HIGH CUT control (80-120Hz, center click), LOW CUT control (80-120Hz, center click), LOW CUT switch (ON/OFF) |
| Output power | 150W |
| I/O connectors | INPUT: XLR3-31 type (balanced) x2, PHONE (balanced) x2 / OUTPUT: XLR3-32 type (balanced) x2 (L&R) |
| Power consumption | 70W |
| Shape | Bass-reflex type |
| Cabinet material | MDF |
| Net weight | 12.5kg (27.6 lbs.) |
| Colour | 8'' Subwoofer Studio Monitor |