or make 4 interest-free payments of $109.75 AUD fortnightly with Afterpay More info

(No reviews yet) Write a Review

With the WL-50 itrs never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals and includes a docking port for charging the transmitter and automatically setting the best wireless connection. Therers even a handy DC output allowing you to distribute power to multiple pedals on your board.
nOnce you experience the wireless independence provided by the WL-50 yourll never go back to using a standard cable again! Setup is quick and simple and you're able to move about freely while playing at home jamming with friends and performing on stage. During sound check at a gig you can listen to your tone out front and dial in the best sound for your audience. And with the ability to roam and interact with other musicians your live shows will be more dynamic and entertaining than ever.
nSpecifications (RECEIVER)Wireless FormatBOSS proprietary digital audio formatWireless carrier frequency2.4 GHzCompatible Channels14
(May vary due to local conditions)Transmission Range65 feet line-of-sight
(May vary due to local conditions)Latency2.3 msDynamic Range110 dB or greaterFrequency Response20 Hz--20 kHzNominal Input Level-10 dBuInput Impedance1 M ohmNominal Output Level-10 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterControlsCABLE TONE switch (OFF/SHORT/LONG)IndicatorsPOWER
RECEIVEConnectorsINPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jackPower SupplyAlkaline battery (AA` LR6) x 2
AC adaptor (sold separately)Current DrawDuring wireless operation: 60 mA
While charging transmitter: 320 mAExpected battery life under continuous useAlkaline battery (AA` LR6): Approximately 10 hours
* These figures will vary depending on the actual conditions of use.AccessoriesOwner's Manual
Rubber foot x 4
Alkaline battery (AA` LR6) x 2

An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).Options (sold separately)AC adaptor: PSA-S series
Parallel DC cord: PCS-20A (DC Plug x8)Size and Weight (RECEIVER)Width72 mm
2-7/8 inchesDepth121 mm
4-13/16 inchesHeight56 mm
2-1/4 inchesWeight (including battery)220 g
8 ozSpecifications (TRANSMITTER (WL-T))Nominal Input Level-10 dBu (1 M ohm)IndicatorBATTERYConnectorsInput plug: 1/4-inch TRS phone type
DC IN 5 V port: USB Micro-B typePower SupplyRechargeable lithium-ion battery
Supplied from the DC IN 5 V portCurrent Draw350mABattery charging timeApproximately 3 hoursExpected battery life under continuous useApproximately 12 hours
* These figures will vary depending on the actual conditions of use.Size and Weight (TRANSMITTER (WL-T))Width87 mm
3-7/16 inchesDepth22 mm
7/8 inchesHeight36 mm
1-7/16 inchesWeight43 g
2 oz* 0 dBu = 0.775 Vrms*The specifications are subject to change without notice.