SMS for a Deal: +61423411752 | Call Us: 0755962588
Yamaha MG10 10-Channel Analogue Mixer is the 10-channel analogue desk for a solo performer, a duo or a small rehearsal room that wants four proper mic preamps, two compressors and three stereo inputs in a box that weighs under two kilograms. It skips effects and USB, so the money goes into the preamps and the metal chassis.
Four mono channels take a mic or a line source through a D-PRE preamp with +48 V phantom power and a 26 dB pad, with equivalent input noise of -128 dBu at full gain. Three stereo inputs handle a keyboard, a backing track and a playback device. Two channels carry a one-knob compressor that moves the threshold from +22 dBu to -8 dBu and the ratio up to 4:1 as you turn it, and every channel gets 15 dB of boost or cut on a 10 kHz high shelf, a 2.5 kHz mid and a 100 Hz low shelf.
A single aux send feeds a monitor wedge or an outboard reverb, with a separate monitor output and a headphone output alongside the stereo outputs. Two 7-segment LED meters read from -20 dB to peak, a peak LED on each channel lights 3 dB below clipping, and channel crosstalk is rated at -83 dB.
The metal chassis is 308 mm wide, 294 mm deep and weighs 1.9 kg, powered by the included PA-10 AC adaptor and drawing 22.9 W. The optional BMS-10A adaptor mounts the desk on a mic stand for a solo act working without a table.
| Brand | Yamaha |
|---|---|
| Model | MG10 |
| Included | Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A |
| Strings | Operating Temperature: 0 to +40˚C |
| Outline | +48 V |
| Bus | Stereo: 1, AUX: 1 |
| Input Channel Function | 26 dB (Mono) |
| COMP | 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec |
| EQ HIGH | Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving |
| EQ MID | Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking |
| EQ LOW | Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving |
| PEAK LED | LED turns on when post EQ signal reaches 3 dB below clipping |
| Level Meter | 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] |
| Hum & noise level | -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) |
| Crosstalk | -83 dB |
| Power requirements | PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha |
| Power consumption | 22.9 W |
| Dimensions | 308 mm (12.1") |
| Net weight | 1.9 kg (4.19 lbs.) |
| Colour | 10 Channel Analog Mixer |
